2007 Birmingham DLC-2080


Manual Engine Lathe


Swing over bed: 20"
Swing over cross slide: 11-3/8"
Swing over gap: 30"
Length of gap: 10"
Distance between centers: 80"
Spindle Bore: 4-1/8" (This has the extra bore opening)
Spindle nose type (Camlock): D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 9-3/4"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Leadscrew TPI: 2
Feed rod diamter: 1" Hex
Tooling size: 1" x 1"
Compound slide travel: 5-7/8"
Cross slide travel: 13-3/4"
Tailstock taper: MT-5
Quill travel: 6"
Quill diameter: 3"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
New Weight Approx: 5090 Lbs.

STANDARD EQUIPMENT

12" 3 Jaw Chuck with reversible jaws
16" 4-Jaw Chuck
19" Face plate
Steady rest capacity 1-1/8 - 7-7/8"
Follow rest capacity 3/4" - 4"
Dead centers, MT-4
Foot Brake
Threading Dial
Coolant System w/Full Length Splash Guard
Halogen work lamp

ADDITIONAL

Quick change tool post
tooling an inserts..
Newall C80 digital Readout
TAPER Attachement, never used...

 
 
 
 

REQUEST A QUOTE FOR THIS MACHINE



Go back to the home page ----} HOME PAGE



Two Spade Machinery LLC, Phone: (802) 518-4161 & (802) 376-8157, Email: tobin@2spade.com, Web: www.2spade.com

Send Me An Email Call Me On Skype Like Me On Facebook Follow Me On Twitter Follow Me On Digg Join My LinkedIN Network Read My Blog On Wordpress Subscribe To My RSS Feed See My Videos On Youtube See What I Am Selling On Ebay Classifieds See My Photo Stream On Flickr